Sadly, even you think you got the best USA made historic reissue guitar that is supposed to be vintage quality correct in and out, you might be disappointed once you look inside of the cavity. In this day and age manufacturers would rather put PCBs, those tiny little jokes of potentiometers, wrong ceramic capacitors, hookup wire that is too thin and falls apart before you even get to touch it, not to mention the increasingly poor soldering jobs and brittle pickup selectors that give you hell each time you turn the gain up. Once you try our harness, you will instantly see a tremendous improvement in your tone, the highs will be smooth and the low end will clear out, almost as if a dirty old blanket has been lifted off your setup. We have put a great deal of time into testing every available component on the market and came up with the perfect recipe, quality CTS pots pair with SoZo tone caps that outperform the overpriced "vintage reissue" models. All hand assembled and soldered in our shop by real techs.
-
About
-
Specs
- 500K Long or Short shaft CTS potentiometers
- Darkmoon® Oil filled vintage guitar tone caps .022uF
- Switchcraft input jack
- High-quality Switchcraft
- Vintage correct 22AWG braided conductor wire
- Vintage 50's or Modern style wiring
- Push/Pull pot options to split humbuckers
- Hand soldered using high conductivity silver solder for optimal tone
*Please note that we only use standard 3/8" diameter pots, if you have an Asian, or Mexican made instrument, chances are that you will have to enlarge the holes with a tapered reamer to ensure a correct fit.
